GPS

GPS receiver

GPS receiver

Our satellite receiver is a compact and easy solution for sending the position where our transmitter is located. It is very useful to know the position of the helicopters, motorcycles, mobile units, wireless cameras and etc.

The received GPS data allows the receiver to know the position, distance, etc. of the transmitter, controlling the multisector antenna based on the GPS position of the transmitter, as well as controlling the QPT pan-tilt positioner with an offset antenna towards the transmitter.

It has a direct connection to SVP equipments. The HDT-02, HDT-04 and the HDT-70 units have a specific connector for connecting this GPS antenna. It can also be connected to a HDR-106 receiver (the receiver must also know its position to perform autotracking).

The transmitter is responsible for the power supply of the GPS. Also it’s the transmitter who is in charge to receive the data information from the GPS. The connection to the transmitter is made with a Lemo 6 connector and the connection to the receiver with a DB-9 connector.

In the receiver the data obtained is through a serial connector DB-9. This allows a direct connection to the PC and display the position using a software like Google – Earth or similar.

GPS
GPS 1
2d