HDR-70_MPEG2

HD Portable Receiver

The new HDR-70 is a digital HD portable receiver. It can receive HD (High Definition) and SD (Standard Definition) signals. The HDR-70 is a “two box” system with 70MHz intermediate frequency. It consists of a control unit and one or more RF heads connected with triax cable, working in diversity mode. The distance between the control unit and the RF heads can be up to 600m.

Main Features:
- Frequency range: 1,3 to 13 GHz
- Diversity: Single, 2 or 4
- Diversity technique: MRC (Maximum Ratio Combining)
- COFDM DVB-T compliant
- Encription BISS-1, BISS-E, SEC-3
- MPEG-2 HD 422/420 decoder
- Ultra low delay
- Automatic video format detection
- Automatic configuration based on detected video format
- (2) Analogue video, (2) HD/SD-SDI and ASI outputs
- Down-conversion HD to SD (Optional)
- 2 Stereo audio outputs: Analogue/SDI Embedded
- 2 Stereo pairs AES/EBU (Optional)
- Genlock input
- AC and DC extended power supply range
- Configuration: Local (front panel) or remote (NetC Software*)
- Protected against polarity reverse
- Maximum FI cable length: 600m of 8mm triax cable
- Quickset system for tripod and antenna installation
- Lemo connector for MD-70 in the RF head

* NetC Software available in the support section.

The new HDR-70 is a digital HD portable receiver. It can receive HD (High Definition) and SD (Standard Definition) signals. The HDR-70 is a “two box” system with 70MHz intermediate frequency. It consists of a control unit and one or more RF heads connected with triax cable, working in diversity mode. The distance between the control unit and the RF heads can be up to 600m.

Main Features:
- Frequency range: 1,3 to 13 GHz
- Diversity: Single, 2 or 4
- Diversity technique: MRC (Maximum Ratio Combining)
- COFDM DVB-T compliant
- Encription BISS-1, BISS-E, SEC-3
- MPEG-2 HD 422/420 decoder
- Ultra low delay
- Automatic video format detection
- Automatic configuration based on detected video format
- (2) Analogue video, (2) HD/SD-SDI and ASI outputs
- Down-conversion HD to SD (Optional)
- 2 Stereo audio outputs: Analogue/SDI Embedded
- 2 Stereo pairs AES/EBU (Optional)
- Genlock input
- AC and DC extended power supply range
- Configuration: Local (front panel) or remote (NetC Software*)
- Protected against polarity reverse
- Maximum FI cable length: 600m of 8mm triax cable
- Quickset system for tripod and antenna installation
- Lemo connector for MD-70 in the RF head

* NetC Software available in the support section.

• Frequency range	2,0 to 2,5 GHz 2,2 to 2,6 GHz 3,4 to 3,7 GHz 6,7 to 7,2 GHz 10,0 to 10,5 GHz 12,7 to 13,5 GHz (For other frequency bands, please contact with SVP)	Video output	Composite video (PAL/NTSC) SD-SDI SMPTE-259M (272M) HD-SDI SMPTE-292M (299M) DVB-ASI Transport Stream Down-conversion HD to SD (Optional)
  Tuning range	500 MHz standard (Other bandwidths upon request)	Video formats	1080i: 1920 x 1080 720p: 1280 x 720 576i(PAL): 720 x 576 480i(NTSC): 720 x 480
  Frequency selection	15 preset channels 100 KHz steps	Audio	Analogue: 4 audios Digital: 4 audios , SDI embedded Digital: 2 pairs AES/EBU  (Optional)
  Reception threshold	-95dBm @QPSK ½	Encryption	BISS-1 and BISS-E SEC-3 SVP Proprietary encryption OEM Encryption
  Diversity	Single, 2 or 4 MRC Technique (Maximum Ratio Combining)	Genlock	Black Burst Tri-Level
  Control to RF head distance	Up to 600m	Control	Front panel and display From the RF head Remote: NetC Software (Ethernet)
  Demodulation	COFDM 2K mode QPSK, 16QAM, 64QAM FEC: 1/2, 2/3, 3/4, 5/6, 7/8 IG: 1/4, 1/8, 1/16, 1/32	Monitorization	Alarms, warnings, Logbook Signal quality parameters (MER, BER, Level, C/N…)
  Bandwidth	5, 6, 7 and 8 MHz	Power supply	AC: 100 to 240 V DC: 11 to 36 V         21 to 56 V (optional)
  Data Rate	3,11 to 31,67 Mbps	Mechanical interface	Quickset system for antenna and tripod
  Decoder	MPEG-2 HD 422/420	Size	RF head: 200 x 140 x 280 mm Control: 1 RU, depth 330 mm
  Delay	Super low delay SD:45ms, 720p:45ms, 1080i:90ms