DR-100

SD Diversity Receiver

The DR-100 series diversity receiver with UHF intermediate frequency inputs, has been designed to receive Standard Definition video signals. This rack unit receiver is used together with the DC-COFDM down converters, which translate RF frequency to the UHF band.

This diversity receiver, together with the DC-COFDM down-converters is especially suitable for camera link reception, receiver system in point to point fixed links and in digital central receiver systems.

Main Features:
- UHF band intermediate frequency input (48 to 860MHz)
- Diversity: 2 or 6
- Diversity technique: MRC Maximum Ratio Combining
- COFDM DVB-T Compliant
- SD MPEG-2 4:2:0/4:2:2 Decoder
- Super low latency
- (2) Analogue video, (2) HD/SD-SDI and ASI outputs
- 2 Stereo audio outputs: Analogue/SDI Embedded
- Genlock input
- AC and DC Extended power supply
- Configuration: Local (front panel) or remote (Ethernet*)
- Protected against polarity reverse
- Alarms and warnings monitorization
- Maximum FI cable length 100m RG-214, 200m ceflex ½”


-Remote software available in support section

The DR-100 series diversity receiver with UHF intermediate frequency inputs, has been designed to receive Standard Definition video signals. This rack unit receiver is used together with the DC-COFDM down converters, which translate RF frequency to the UHF band.

This diversity receiver, together with the DC-COFDM down-converters is especially suitable for camera link reception, receiver system in point to point fixed links and in digital central receiver systems.

Main Features:
- UHF band intermediate frequency input (48 to 860MHz)
- Diversity: 2 or 6
- Diversity technique: MRC Maximum Ratio Combining
- COFDM DVB-T Compliant
- SD MPEG-2 4:2:0/4:2:2 Decoder
- Super low latency
- (2) Analogue video, (2) HD/SD-SDI and ASI outputs
- 2 Stereo audio outputs: Analogue/SDI Embedded
- Genlock input
- AC and DC Extended power supply
- Configuration: Local (front panel) or remote (Ethernet*)
- Protected against polarity reverse
- Alarms and warnings monitorization
- Maximum FI cable length 100m RG-214, 200m ceflex ½”


-Remote software available in support section

• Frequency Range	70 MHz to 13,5 GHz (Depends on selected down-converter)	Video output	Analogue video (PAL/NTSC) SD-SDI SMPTE-259M (272M) DVB-ASI Transport Stream
  Frequency resolution	100 KHz steps	Audio	Analogue: 4 mono/2 stereo Digital: 2 stereo SDI embedded
  Reception threshold	-95 dBm @ QPSK ½	Data	GPS data output (NMA) Data channel up to 115.200 bps (RS-232)
  Diversity	2 or 6, MRC technique (Maximum Ratio Combining)	Genlock	Black Burst
  Distance control/ RF head	100 m max, RG-214 cable	Control	Local: Front panel Remoto: Ethernet and RS-232
  Demodulation	COFDM, 2K and 8K modes QPSK, 16QAM, 64QAM FEC: ½, 2/3, ¾, 5/6, 7/8 GI: ¼, 1/8, 1/16, 1/32	Monitorization	Alarms, warnings, logbook Signal quality parameters (MER, BER, nivel,…)
  Bandwidth	5, 6, 7 and 8 MHz	Power supply	DC: 11 to 36 V        21 to 56 V (optional) AC: 100 to 240V
  Data Rate	3,11 to 31,67Mbps	Size:	RF head: 200x140x280 mm Control: 1RU, 330 mm depth
  Decoder	MPEG-2 (4:2:2/ 4:2:0)	Delay	Super Low Delay, SD 80 ms